8 Channel Data Logger Temperature Data Acquisition, 5" Color LCD Programmable Touch Screen, 8GB Storage, USB/U-Disk Export, Multi-Channel Alarm for Industrial Monitoring,ET3916-8, Resolution 0.1

Adopt 5 inches industrial true-color display LCD display screen;Adopt high speed and high performance 32 bits ARM microprocessor, fast response speed; It supports multi channel signals’ acquisition, recording, display, alarm; Each measurement module supports measurement of 8 channels, the max to 64 channels; Modules quantity can be equipped according to customers’ requirement.The data can be displayed in three modes: numerical values, curves and bar charts. The numerical interface supports the values of 4/8/16/32 channels to be displayed in same time, and its automatic page-turning, the time of page-turning can be selected by multi-levels.6 digits display, display range can reach -999.99~9999.99； Equipped GB2312 Chinese Character Library with full input method;Each channel supports parameter setting separately( including upper/ lower alarm, temperature calibration, display unit) and arbitrary naming;When the measured temperature excesses upper/ lower alarm, it will alarm (optional: relay alarm output)Real-time clock: adopt hardware real-time clock, lithium battery power; the max time error is ±1 min/year Each channel is isolated, disturb of high frequency and isolated voltage peak value reach 400V Supports thermocouple measurement: J、K、T、E、S、N、B、RThe 8GB FLASH memory chip is used to store historical data, and the data can be exported through the U disk;Measurement speed for option: slow speed: 1 s/channel, medium speed: 0.5 s/channel;USB-HOST and USB-DEVICE communication port; USB-HOST to export the historical data through U-Disk; USB-DEVICE to communicate with computer;

• Different temperature sensors can be connected. However, the standard configuration only provides K-type thermocouples (-20 to 200 degrees). Other sensors need to be purchased separately. The serial port software is supported. The warranty period is one year. If there are any problems, please send an email.
• The instrument initially records once every second. You can set up a new file to record every 5 seconds or every 10 seconds as per your requirements.
• After installing the software on the computer, you need to export the data. The document's saved format is .csv.
• When operating the machine to export data, be sure the USB drive is empty and less than 8G.